Motorola iM1000 User Manual page 79

iM1000 -Data Modem
Restore Factory Defaults
This command causes the modem to reset all parameters and
S-registers to their factory-defined default values. The optional
parameter value, if present, must be 0.
&F
Action
Query
Range
Local Flow Control (Traditional)
This parameter selects the type of flow control used between
the computer and the modem while in data transfer mode. This
command is supported for backwards compatibility purposes.
This command sets the method of flow control for both
directions of the computer-to-modem interface, while the +IFC
command allows for a separate setting for each direction. The
setting of this command may implicitly alter the settings of the
+IFC command.
&K
Action
Query
Range
Parameter Values:
0
3
4
Display Current Parameter Values
This command allows the computer to view the parameter and
S-register settings for the active configuration profile.
&V
Action
Query
Range
78
AT&f
AT&k<setting>
No Flow Control (not recommended).
RTS/CTS Flow Control
XON/XOFF Flow Control
AT&v