Result Codes - Motorola 326X V.34 User Manual

Result Codes

Result codes are responses sent to the terminal by the AT ACU. Result codes may be
sent in word form (RsltForm=Verbose or ATV1), numeric form (RsltForm=Numeric
or ATV0), or disabled (RsltCode=Disable or ATQ1). When numeric form is selected,
the modem issues only a number code.
The rate displayed in a CONNECT message depends on the Connect Message option
(ACU OPTS menu). If Con Msg=DTE Rate, the DTE-to-modem rate is displayed. If
Con Msg=DCE Rate, the modem-to-modem rate is displayed. If Speed Conver-
sion=Off (AT
the CONNECT message speed reflects both the DTE-to-modem and the modem-to-
modem rate, which are the same.
Table A-5 provides a listing of word- and numeric-form result codes.
Table A-5.
Result Codes
* SC0), or if the modem is operating in Direct or synchronous modes,
Word Form Response
OK
CONNECT
RING
NO CARRIER
ERROR
CONNECT 1200
NO DIALTONE
BUSY
NO ANSWER
PASSWORD PROTECTED
INITIATING RC
RC NOT AVAILABLE
RC FAILED
RC DENIED
RC ESTABLISHED
UNDER RMT CONFIG
RC COMPLETE
RC ABORTED
RC SESSION IN PROGRESS
NETWORK MANAGEMENT INHIBITED
CONNECT 600
CONNECT 2400
CONNECT 4800
CONNECT 7200
CONNECT 9600
CONNECT 12000
CONNECT 14400
CONNECT 16800
CONNECT 19200
CONNECT 21600
Numeric Form Response
0
1
2
3
4
5
6
7
8
40
50
51
52
53
54
55
56
57
58
60
13
10
11
15
12
16
17
18
14
19
Configuration Quick Reference A-41