Power Configuration; Switched Power Connection - Motorola iM1000 User Manual

iM1000 -Data Modem
If necessary, cut off the access cable and install the cable connector.
5. To assure compliance with United States FCC regulations on RF
exposure, position the antenna in such a way to maintain a
separation distance of at least 8 inches (20 cms) between the
antenna and the body of any user and nearby person. Connect the
antenna cable connector to the radio antenna connector on the rear
of the iM1000. See Figure 4.
6. Plug the power cable into the iM1000 power connector.
Figure 4. - Connections to iM1000 Rear Panel
Power Configuration
To turn ON the iM1000 modem, an ignition signal is required at the ignition
connector. It can be supplied in two ways.

Switched Power Connection

When installed in a vehicle, the modem receives the ignition signal from the
vehicle's ignition switch.
The modem operates only when the car switch is turned
ON.
8
N O T E