Motorola iM1000 User Manual page 74

Dial
This command instructs the DCE to originate a call.
When the DCE receives the dial string from the computer, all
non-numeric characters in the Dial String that are not
recognized dial-modifiers are ignored. This allows the DTE to
request modem numbers containing unsupported dial
modifiers, hyphens, parenthesis, and other punctuation.
Action
Query
D
Range
Parameter Values:
Dial String contains a modem number to be dialed, translated
into an array of ASCII characters between 0 and 9 inclusive.
Dial Modifiers:
T
P
!
W
,
;
Hangup
This command instructs the modem to terminate the active
call.
H
Action
Query
Range
ATd <Dial String>
Allowed, but ignored by the modem.
Allowed, but ignored by the modem.
Hook Flash (1/2 second).
Wait for time specified in S7 for dial tone.
Wait for time specified in S7 for one or more
rings followed by five seconds of silence before
continuing execution of dial string.
Pause for time specified in S8.
After dialing return to command mode.
ATh
APPENDIX
73