Running Applications Over Packet Data; Ending A Packet Data Call - Motorola iM1000 User Manual

Data modem

Hide thumbs Also See for iM1000:

Table of Contents

iM1000 -Data Modem

Running Applications over Packet Data

You can run any standard TCP/IP application during a packet data session.

To start a packet-data session, double-click the iX1000 Packet Data Services

icon.

When a packet-data session is active, your service provider

is your iDEN carrier and not an Internet service provider.

This means that any software speciﬁcally conﬁgured for use with other

service providers might need to be reconﬁgured for use with your iDEN

carrier.

To end a packet data call:

• If the status window is open, click the button marked X at the upper right

corner of the iDEN Status window. This disconnects your modem from

the network and closes the status window.

• If the status window is closed, click the modem icon on your desktop

taskbar to open the status window. Then click the X at the upper right

corner of the iDEN Status window.

N O T E

Figure 61. iDEN Status Window

Table of Contents