Lubrication - Hakki Pilke 38 Pro PTO Instructions Manual

5.5.

Lubrication

All of the firewood processor's lubrication points, which require Vaseline, have been labelled. There are 13
lubrication points, presented in the figures below.
1. Grease nipples of the height adjustment device of the splitting blade (2 pcs) in Figure 38. Every 100 hrs
2. Grease nipple of the out-feed conveyor's turning joint (1 pc) in Figure 39. Every 50 hrs
3. Hinged nipples of the guard (2 pcs) in Figure 40. Every 50 hrs
4. Cylinder nipples of the cutting unit (2 pcs) in Figures 41 and 43. Every 50 hrs
5. Grease nipples of the joint of the cutting unit (2 pcs) in Figure 42. Every 50 hrs
6. Grease nipple for the wood measuring device in Figure 44. Every 50 hrs
7. Grease nipple of the infeed conveyor bearing in Figure 45. Every 50 hrs
8. Grease nipples of the outfeed conveyor bearing in Figure 46. Every 20 hrs
Figure 38.
Figure 40.
Hakki Pilke 38 Pro
31 / 40
Translation
Figure 39.
Figure 41.
Version 3