Network - QNAP TS-110 Software User Manual

4.3 Network

Go to "Control Panel" > "System Settings" > "Network" to configure the NAS network
settings.
In this chapter, the following topics are covered:
TCP/IP
91
Wi-Fi
97
IPv6
99
Service Binding
Proxy
101
DDNS Service
101
TC P/IP
(i) IP Addre ss
Configure the TCP/IP settings, DNS Server and default Gateway of the NAS on this
page.
Click the "Edit" button next to an interface to edit the network settings (including
"Network Parameters", "Advanced Options", and "DHCP Server".) For the NAS with two
LAN ports, users can connect both network interfaces to two different switches and
configure the TCP/IP settings. The NAS will acquire two IP addresses which allow access
100
91