QNAP TS-110 Software User Manual page 16

LED C olor
1
Green
Power
Orang
LAN
e
10
Green
GbE*
Red/
HDD
Green
USB Blue
eSATA* Orang
LED Sta tus
Green
Off
Flashes green
Green
Orange
Flashes orange
Green
Off
Red
Flashes green
Green
Flashes blue
every 0.5 sec
Blue
Off
Flashes
De sc ription
The NAS is ready.
All the hard disk drives on the NAS are in
standby mode.
The NAS is booting up.
The NAS is on and ready.
The disk data is being accessed from the
network.
The NAS is connected to the network.
The 10GbE network expansion card is
installed.
No 10GbE network expansion card is
installed.
A hard drive read/write error occurs.
The disk data is being accessed.
The hard drive can be accessed.
1) A USB device (connected to front USB
port) is being detected.
2) A USB device (connected to front USB
port) is being removed from the NAS.
3) The USB device (connected to the front
USB port) is being accessed.
4) The data is being copied to or from the
external USB or eSATA device.
A front USB device is detected (after the
device is mounted.)
1) No USB device is detected.
2) The NAS has finished copying the data
to or from the USB device connected to
the front USB port of the NAS.
The eSATA device is being accessed.
16