Ftp - QNAP TS-110 Software User Manual

6.2 FTP

Go to "Control Panel" > "Network Services" > "FTP" to Configure the FTP server.
F TP Se rv ic e
When you enable the FTP service, you can specify the port number and the maximum
number of users that are allowed to connect to the NAS by FTP at the same time. To
use the FTP service of the NAS, enable this function. Open an IE browser and enter
ftp://NAS IP. Enter the username and the password to login the FTP service.
Protoc ol Ty pe : Select to use standard FTP connection or SSL/TLS encrypted FTP.
Select the correct protocol type in your client FTP software to ensure successful
connection.
Port num be r: Specify the port number of the FTP service.
Unic ode Support: Toggles Unicode support. The default setting is No. If your FTP
client does not support Unicode, it is recommended to disable this option and select
the specified language in "General Settings" > "Codepage" so that the file and folder
names can be correctly displayed. If your FTP client supports Unicode, enable this
option for both your client and NAS.
Ena ble Anony m ous: Enable this option to allow anonymous access to the NAS by
FTP. Anonymous users can connect to files and folders which are open for public
access. If this option is disabled, users must enter an authorized username and
password to connect to the NAS.
170