QNAP TS-110 Software User Manual page 34

The registered myQNAPcloud name on the source NAS will not be moved to the
destination NAS after system migration. To use the same myQNAPcloud name on
the destination NAS, change the myQNAPcloud name on the source NAS before
system migration and register the same name on the destination NAS after the
process is completed. Contact the QNAP technical support department if you
encounter any issues during this process.
Disk V olum e s Supporte d for Sy ste m Migra tion
Refer to the following table for the relationship between the number of NAS bays and the
disk volume supported for system migration.
De stina tion NAS
1-bay NAS
2-bay NAS
4-bay NAS
5-bay NAS
6-bay NAS
8-bay NAS
Disk v olum e supporte d for sy ste m m igra tion
1-drive single disk volume
1 to 2-drive single disk volume, JBOD, RAID 0,
2-drive RAID 1.
1 to 4-drive single disk volume, JBOD, RAID 0,
2-drive RAID 1,
3 to 4-drive RAID 5,
4-drive RAID 6,
4-drive RAID 10.
1 to 5-drive single disk volume, JBOD, RAID 0,
2-drive RAID 1,
3 to 5-drive RAID 5,
4 to 5-drive RAID 6,
4-drive RAID 10.
1 to 6-drive single disk volume, JBOD, RAID 0,
2-drive RAID 1,
3 to 6-drive RAID 5,
4 to 6-drive RAID 6,
4-drive or 6-drive RAID 10.
1 to 8-drive single disk volume, JBOD, RAID 0,
2-drive RAID 1,
3 to 8-drive RAID 5,
4 to 8-drive RAID 6,
34