QNAP TS-110 Software User Manual page 139

The following information is required to create new users:
Username: The username is case-insensitive and supports multi-byte characters,
such as Chinese, Japanese, Korean, and Russian. The maximum length is 32
characters. Invalid characters are: " / \ [ ] : ; | = , + * ? < > ` '
Password: The password is case-sensitive. It is recommended to use a password of
at least 6 characters. The maximum length is 64 characters.
In this chapter, the following topics are covered:
Creating a User
Creating Multiple Users
Importing/Exporting Users
Home Folders
141
C re a ting a Use r
To create a user on the NAS, follow the steps below:
1. Go to "Control Panel" > "Privilege Settings" > "Users".
2. Click "Create" > "Create a User".
3. Follow the wizard instructions to complete the details.
C re a ting Multiple Use rs
To create multiple users on the NAS, follow the steps below:
1. Go to "Control Panel" > "Privilege Settings" > "Users".
2. Click "Create" > "Create Multiple Users".
3. Click "Next".
4. Enter the name prefix (for example: "test".) Enter the start number for the
username, e.g. 0001 and the number of users to be created (for example: 10.) The
NAS will then create ten users named: test0001, test0002, test0003 ... test0010.
II, TS-859 Pro+, TS-859U-RP, TS-859U-RP+, TS-809 Pro,
TS-809U-RP, TS-879 Pro, TS-1079 Pro, TS-879U-RP, TS-
EC879U-RP, TS-1279U-RP, TS-EC1279U-RP, TS-269 Pro,
TS-269L, TS-469 Pro, TS-469L, TS-569 Pro, TS-569L, TS-
669 Pro, TS-669L, TS-869 Pro, TS-869L, TS-251, TS-451,
TS-651, TS-851, TS-253 Pro, TS-453 Pro, TS-653 Pro,
TS-853 Pro, SS-453 Pro, SS-853 Pro.
139
139
140
139