Windows 7 - QNAP TS-110 Software User Manual

4.10.2.1 Windows 7

Follow these steps to set up your printer connection:
1. Go to Devices and Printers.
2. Click "Add a printer".
3. In the Add printer wizard, click "Add a network, wireless or Bluetooth printer".
4. While Windows is searching for available network printers, click "The printer that I
want isn't listed".
5. Click "Select a shared printer by name", and then enter the address of the network
printer. The address is in the following format – http://NAS_IP:631/printers/
ServernamePR, where the NAS_IP can also be a domain name address if you want
to print remotely. For example, http://10.8.13.59:631/printers/NASPR3
6. The wizard will prompt you for the correct printer driver. You can also download the
latest printer driver from the manufacturer's website if it is not built-into Windows
operating system.
7. After installing the correct printer driver, the wizard shows the address and driver of
the new network printer.
8. You can also set the network printer as the default printer or print a test page.
Click "Finish" to exit the wizard.
9. The new network printer is now available for printing.
123