QNAP TS-110 Software User Manual page 60

RAID 1 Yes
RAID 5 Yes
RAID 6 Yes
RAID 10 No
Note :
After recovering a RAID 1, RAID 5 or RAID 6 disk volume from not active to
degraded mode by the RAID recovery, you can read or write the volume normally.
The volume status will be recovered to normal after synchronization.
If the disconnected drive is damaged, the RAID recovery function will not work.
Sta nda rd
RAID 5
Degraded N-1
mode
Read Only N/A
Protection
(for immediate
data backup &
hard drive
replacement)
RAID N/A
Recovery
(RAID Status:
Not Active)
1 or 2
2 or more
3 or more
-
Q NAP RAID 5
N-1
N-1, bad blocks
found in the
surviving hard
drives of the
array.
If re-plugging in
all original hard
drive to the NAS
and they can be
spun up,
identified,
accessed, and
the hard drive
superblock is not
damaged.
60
Sta nda rd Q NAP RAID 6
RAID 6
N-1 & N-2 N-1 & N-2
N/A N-2, bad blocks
found in the
surviving hard
drives of the
array.
N/A If re- plugging in
all original hard
drives to the NAS
and they can be
spun up,
identified,
accessed, and
the hard drive
superblock is not
damaged.)