Power - QNAP TS-110 Software User Manual

Wa ke - on- LAN (WO L)
Enable this option to allow users to power on the NAS remotely by Wake on LAN. If the
power cable is unplugged when the NAS is turned off, Wake on LAN will not function
even if the power supply is reconnected afterwards. To wake up the NAS when it is in
sleep mode or powered down, press the NAS power button or use the WOL feature in
Qfinder Pro or Qmanager. The wake-up function on the NAS is only available after the
WOL option is enabled in "Control Panel" > "System Settings" > "General Settings" >
"Power" > "Wake-on-LAN (WOL)".
For Qfinder Pro, select a NAS and click "Tools" > "Remote Wake Up (Wake on LAN)".
For Qmanager, click ">" next to the NAS to be selected on the login page, scroll
down to the bottom of the screen and click "Wake on LAN (WOL)".
This feature is only supported by certain NAS models.
Powe r Re c ov e ry
Configure the NAS to resume to the previous power-on or power-off status, turn on, or
remain off when the AC power resumes after a power outage.
Note : Only x86-based NAS models can be turned on automatically after power
recovery. To set it up, select "Turn on the server automatically" in "Control Panel" >
"System Settings" > "Power" > "Power Recovery".
Powe r Sc he dule
Specify the schedule for automatic system power on/off, restart, or sleep mode.
Weekdays are Monday to Friday, weekends are Saturday and Sunday. Up to 15
schedules can be set.
Enable "Postpone the sleep/restart/shutdown schedule when replication job is in process"
to allow scheduled system restart/shutdown to be carried out after a running replication
job completes. Otherwise, the NAS will ignore the running replication job and execute
scheduled system restart or shutdown.
Note :
The system cannot be shut down or restarted in sleep mode.
108