Firmware Update - QNAP TS-110 Software User Manual

4.8 Firmware Update

Go to "Control Panel" > "System Settings" > "Firmware Update" to update the firmware
version of the NAS.
Liv e Upda te
Select "Automatically check if a newer version is available when logging into the NAS
web administration interface" to allow the NAS to automatically check if a new firmware
version is available. If a new firmware is found, you will be notified after logging in the
NAS as an administrator. Click "Check for Update" to check if any firmware update is
available. Note that the NAS must be connected to the Internet for these features to
work.
F irm wa re Upda te
Before updating the system firmware, make sure the product model and firmware version
are correct. Follow these steps to update the firmware:
1. Download the firmware release notes from the QNAP website http://www.qnap.com.
Read the release notes carefully to make sure it is necessary to update the
firmware.
2. Download the NAS firmware and unzip the IMG file to the computer.
3. Before updating the system firmware, back up all the NAS data to avoid any
113