Table of Contents
Advertisement
2.2.3 CD Installation
Follow the steps in this section to complete CD installation for your NAS:
1. Install the QNAP Qfinder Pro from the product CD-ROM.
2. Run the QNAP Qfinder Pro. If the QNAP Qfinder Pro is blocked by your firewall,
unblock the utility.
3. The built-in Qfinder Pro Setup Wizard will guide you along the way to complete
firmware installation. Next, you can use QTS account username and password to
log in (QTS is the operating system for the NAS.)
Note :
Some new NAS models, such as TS-x12, TS-x20 and TS-x21, no longer include an
installation CD.
The default login ID and password of the NAS are both "admin".
22
Hide quick links:
Advertisement
Table of Contents
