Mac Os 10.4 - QNAP TS-110 Software User Manual

4.10.2.4 Mac OS 10.4

If you are using Mac OS 10.4, follow these steps to configure the NAS printer function:
1. On the toolbar, click "Go/Utilities".
2. Click "Printer Setup Utility".
3. Click "Add".
4. Hold the "alt" key and click "More Printers".
5. In the pop up window, select "Advanced" and "Windows Printer with SAMBA", enter
the printer name and the printer URI (the format is smb://NAS IP/printer name. The
printer name is found on the "Device Configuration" > "USB Printer page"), select
"Generic" for Printer Model and click "Add".
6. The printer appears on the printer list and is ready to use.
Note :
For "Advanced" in Step 5 above, you must hold the "alt" key and click "More
Printers" at the same time to view the Advanced printer settings.
The network printer service of the NAS supports Postscript printer on Mac OS
only.
126