Parameters - Jadever JCL-3K Manual

/MR
2) Press key
G N/SET
3) Press key
/MR
4) Press key
M+/SAVE
5) Press key
ZERO/ESC
Press key
ZERO/ESC
6) Press key
Note: In the parameter setting mode, press the numeric key to choose the parameter
directly.

5-2 Parameters

SET00
1)
SET01
2)
Options are On, OFF, and AUTO
= Backlight
= No backlight
= Auto-on with items greater than 9d placed on the pan. Auto-off within 2s,4s,6s ., 20s,
ever(ever=the backlight lasts forever with more than 9d placed on the pan) when it is stable.
SET02
3)
Options are off, 5min, 10min, 30min, and 60min.
Off : close auto-off function
5，10，30，60：Auto off with less than 9d of gross weight when there is not any operation
within 5min (10, 30, 60min available)
SET03
4)
g g，lb lb
Note: it refers to the weighing unit and unit weight unit.
Such as, if Kg, G is selected, it means the weighing unit is Kg and unit weight unit g.
SET04
5)
d0: display zero with 1 d placed on the pan.
d1: display zero with 2 d placed on the pan. No display with 1d on the pan.
So do as d2, d3, d4 and d5
SET05
6)
On: weight checking starts automatically when powering on
Off: weight checking closes when powering on
SET06
7)
On: it starts checking weight when the weight and amounts are within the checking range
TARE/
or to circle the parameters
to enter the selected parameter.
TARE/
or to circle the items of present parameter.
to save after changing and return to parameters choosing. While
to return without saving.
again to return to weighing mode.
internal code checking
backlight modes shifting
auto-off time setting
using units setting:
zero range setting: d0, d1, d2, d3, d4, d5.
weight checking setting: on, off
stable weight checking setting: on, off
(II)
press SAMPLE to choose unit Kg Kg，Kg g，
6