Outbound Line Group
The outbound lines define a connection between the X2002 and PSTN, ISDN, ITSP
or your trusted peer. See
20.1.3 Before You Begin
Before you start to configure an LCR, please consider the following.
• You have to define your outbound dialing plan. For example, dial a number
starting with "0" is for local calls, "200" is for international calls, "3" is a call to
branch office, etc.
• You should define at least one outbound line group. See
258.
20.2 LCR List
Use this screen to view outbound dialing rules (LCRs) configured on the X2002. To
access this screen, click Configuration > PBX > Outbound Line Management
> LCR.
Figure 180 Outbound Line Management > LCR
Each field is described in the following table.
Table 108 Outbound Line Management > LCR
LABEL
Delete
LCR Name
Description
Move Up/Down
X2002 User's Guide
Section 18.1 on page 253
DESCRIPTION
Select the LCRs that you want to remove in the Delete column and
then click the Delete button.
This is the name of the LCR.
This text describes the LCR.
Use these arrows to re-arrange the LCR sequence.
Chapter 20 LCR
for more information.
Section 18.2 on page
307