Table of Contents
Advertisement
Rename the file you want to upload to ZLD-current and place it in the directory
1
from which you launch your FTP session. In our example this is the root directory
"C:\".
Launch the FTP client on your computer. For example, from the command prompt
2
type ftp, followed by a space and the IP address of your X2002.
Type your username and press [ENTER] when prompted (the default is "admin".
3
Enter your password as requested (the default is "1234").
4
Enter bin to set transfer mode to binary.
5
Use put to transfer files from the computer to the X2002, for example, put ZLD-
6
current transfers the firmware and configuration that your renamed to ZLD-
current to the X2002.
The X2002 uploads the file and automatically reboots. The FTP session with the
7
X2002 is automatically terminated.
This is a sample FTP session showing the transfer of the ZLD-current file to the
X2002:
C:\>ftp 172.23.37.201
Connected to 172.23.37.201.
220 ProFTPD 1.2.10 Server (ProFTPD Default Installation)
[172.23.37.201]
User (172.23.37.201:(none)): admin
331 Password required for admin.
Password: ****
230 User admin logged in.
ftp> bin
200 Type set to I
ftp> put ZLD-current
200 PORT command successful
150 Opening BINARY mode data connection for ZLD-current
226-path /etc/zyxel/ftp/.tmp/ZLD-current
226-firmware verifying...
226-firmware updating...
226-Please Wait about 5 minutes!!
226-Do not poweroff or reset,
226-system will reboot automatically after finished updating.
226 Transfer complete.
226-copy_firmware:file /etc/zyxel/ftp/.tmp/ZLD-current
226-done
226-Receive firmware success!
226-System reboot automatically!
Be sure to upload the correct model firmware as uploading the
wrong model firmware may damage your device.
X2002 User's Guide
Chapter 34 System File Maintenance
455
Advertisement
Table of Contents
