Configuring The Ddns Screen - ZyXEL Communications X2002 User Manual

Hide thumbs Also See for X2002:

Table of Contents

Chapter 5 Network Deployment

5.4.2 Configuring the DDNS Screen

Use this screen to configure your Dynamic DNS settings. To access this screen,

click Configuration > Network > DDNS.

Figure 45 Network > DDNS

Each field is described in the following table.

Table 15 Network > DDNS

Mail Exchanger

Select this to enable the DDNS feature.

Select the type of service that you are registered for with your Dynamic

DNS service provider.

Type your user name.

Type the password assigned to you.

Type the domain name assigned to your X2002 by your Dynamic DNS

You can specify up to two host names in the field separated by a comma

Select the check box to enable DynDNS Wildcard.

This field displays the interface registered to use DDNS services. On the

X2002 it always displays "WAN".

Use this field if the mail exchange server in your organization has a

dynamically assigned IP address and you have not already registered it

with a Dynamic DNS provider. Enter the domain name of your mail

exchange server.

Click this to save your changes.

Click this to set every field in this screen to its last-saved value.

X2002 User's Guide