Table of Contents
Advertisement
Chapter 11 DSP Management
11.3 The DSP Management Screen
Use this screen to manage the DSP channels available on the X2002. To access
this screen, click Configuration > PBX > Server Configuration > DSP
Management.
Note: Your changes of DSP resource reservation will be applied after all ongoing calls
are finished.
Figure 89 Server Configuration > DSP Management
Each field is described in the following table.
Table 47 Server Configuration > DSP Management
LABEL
Attributes
Total
available
FXO
FXS
Conference
PRI
BRI
Share
Apply
Reset
188
DESCRIPTION
This column displays which features use the DSP channels on the
X2002.
The X2002 automatically detects the total available DSP channels
available on the X2002 and displays them in this field. This value is
based on the DSP modules you have installed on the X2002.
This field displays the total DSP channels assigned to the FXO ports on
the X2002. The X2002 automatically assigns one DSP channel per FXO
port on the X2002.
This field displays the total DSP channels assigned to the FXS ports on
the X2002. The X2002 automatically assigns one DSP channel per FXS
port on the X2002.
Specify the DSP channels you want to assign specifically for conference
calls on the X2002.
Specify the DSP channels you want to assign specifically for the PRI
port on the X2002.
Specify the DSP channels you want to assign specifically for the BRI
ports on the X2002.
This field displays the unassigned DSP channels on the X2002.
Unassigned DSP channels are shared among all services which require
DSP services on the X2002.
Click this to save your changes and to apply them to the X2002.
Click this to set every field in this screen to its last-saved value.
X2002 User's Guide
Advertisement
Table of Contents
