Omron NJ501 Connection Manual page 52

9.3.1. Starting the Sysmac Studio and Importing the Project File
Start the Sysmac Studio and import the Sysmac Studio project file.
Install the Sysmac Studio and USB driver in the personal computer beforehand.
1
Start the Sysmac Studio. Click
the Import Button.
*If a confirmation dialog for an
access right is displayed at
start, select to start.
2
The Import File Dialog Box is
displayed. Select
OMRON_NE1A_DN_EV100.SM
C (Sysmac Studio project file)
and click the Open Button.
*Obtain the Sysmac Studio
project file from OMRON.
3
The
OMRON_NE1A_DN_EV100
project is displayed.
The left pane is called Multiview
Explorer, the right pane is called
Toolbox and the middle pane is
called Edit Pane.
*If an error message is
displayed stating "Failed to
Load Descendants", change the
version of the Sysmac Studio to
any version specified in 5.2.
Device Configuration.
9．Appendix Connection Using the "Project File"
Multiview
Explorer
Toolbox
Edit Pane
49