Omron NJ501 Connection Manual page 37

7.4.4. Transferring Device Information
Transfer the device information to the DeviceNet Unit and Safety Network Controller.
When transferring the settings is completed, remote I/O communications start
automatically.
Application precautions
Please confirm that the DeviceNet cable is connected before proceeding to the following
procedure.
If it is not connected, turn OFF the communications power supply and power supply to the
devices, and then connect the DeviceNet cable.
1
Select Select Interface - NExA
USB Port from the Option
Menu.
2
Select
Connect
Network Menu.
from the
7．Connection Procedure
34