Omron NJ501 Connection Manual page 16

7.3.2. Starting the Sysmac Studio and Setting Parameters for the Controller
Start the Sysmac Studio and set the parameters for the Controller.
1
Start the Sysmac Studio.
Click the New Project Button.
*If a dialog box is displayed at
start confirming the access
right, select an option to start.
2
The Project Properties Dialog
Box is displayed.
*In this document, New Project
is set as the project name.
Confirm that the Category and
Device to use are set in the
Select Device Field.
Select 1.03 from the Version
pull-down list.
*Although version 1.03 is
selected in this document,
select the version you actually
use.
3
Click the Create Button.
7．Connection Procedure
13