Omron NJ501 Connection Manual page 22

13
Select Reset Controller from
the Controller Menu.
*When Mode is set to RUN
Mode, Reset Controller cannot
be selected. In this case, select
Mode - PROGRAM Mode from
the Controller Menu to change
to PROGRAM mode and follow
the procedure in this step.
14
A confirmation dialog box is
displayed several times. Click
the Yes Button.
15
The controller is reset, and
Sysmac Studio goes offline.
The yellow bar on the top of the
Edit Pane disappears.
Go online by using steps 7 to 8.
7．Connection Procedure
19