Sending Errors During E-Mail Communication - Mitsubishi Electric FX3U-ENET User Manual

11 TROUBLESHOOTING

11.5.4 Sending errors during e-mail communication

Sending error
Is "0001 " written to
H
BFM#10333?
YES
Is the value of
BFM#10334 set to "0001
YES
Can the error
response be received from
the mail server using the mail
receiving operation?
NO
Check the following items.
E-mail parameter settings of the
Ethernet module
Whether or not the mail server's
system is down
Whether or not there is an error
on the communication path
11 - 44
NO
Correct the condition for writing to
BFM#10333.
NO
"?
H
Are the mail server
port numbers set correctly in
BFM#24320 and 24388?
Is the SMTP authentication
setting used?
When "SMTP-AUTH" is selected,
check whether the SMTP login ID and
password are set correctly.
When "POP before SMTP" is selected,
check whether the POP password and
local mail address are set correctly.
YES
Confirm with the system administrator
that the following are set correctly:
DNS settings
E-mail settings
NO
Set the server port numbers correctly.
YES
NO
YES
Modify the contents of error based on
the e-mail sending error log
(Refer to Section 11.4).
MELSEC-F
11 - 44