Mitsubishi Electric FX3U-ENET User Manual page 21

1 OVERVIEW
Local station
1 - 5
(4) Connecting FX Configurator-EN (Details are explained in the
Operating Manuals for FX Configurator-EN)
(a) Simplifying sequence programs using FX Configurator-EN
FX Configurator-EN supports the parameter setting function to perform the
Ethernet module initialization and the open processing with external devices.
By setting up the following parameters with FX Configurator-EN, access is
enabled from the external device to the PLC. It can also simplify sequence
programs used to perform communication by Ethernet modules.
• IP address setting
• Port number setting
• Protocol type setting
For more information on setting up the Ethernet module, see Section 3.5,
"List of Setting Items for Ethernet Modules" and other applicable reference
sections.
Parameter setting
*1
Ethernet
*2
Serial communication
*1 Access is enabled only when MELSOFT connection is set in the open
method of the Ethernet module.
*2 The open settings is not set for the initial state of the Ethernet module.
Set it through serial communication.
• E-mail settings
• Each timer setting
External device
FX Configurator-EN
MELSEC-F
External device
1 - 5