List Of Setting Items For Ethernet Modules - Mitsubishi Electric FX3U-ENET User Manual

3 SPECIFICATIONS

3.6 List of Setting Items for Ethernet Modules

Parameter setting item
Ethernet module settings
Operational settings
Initial settings
Open settings
Router relay parameter
E-mail settings
Send mail address
setting
*1 The meanings of the abbreviations used in the table above are as follows:
MC: Communication using MC protocol
Mail: E-mail
Fixed: Communication using the fixed buffer
*2 Setting is not necessary if initial values are being used.
3 - 7
The following table lists the parameter setting items that are set using Ethernet Module.
Description of setting
Settings for using the Ethernet module as a network
module.
Set the common items between the modules.
These settings are required for the initial processing.
Set the data communication timer values.
Set the DNS server's IP address.
Set up the open processing for connection in order to
perform data communication with the external device.
Set the router relay of Ethernet.
Perform settings for sending/receiving e-mail.
Set the destination mail address.
: Must be set when the applicable function is used.
POINT
Parameters set in FX Configurator-EN are saved in the Ethernet module's flash
ROM.
Function and parameter setting
1
requirement (* )
MC Fixed Mail
*2 *2 *2
— —
—
— —
— —
: Set as needed
MELSEC-F
Reference
section
MELSOFT
Section 4.5
Section 4.6
*2 Section 5.2
— Section 10.6
Section 5.5
Section 5.3
—
Section 10.6
—
: Setting is not required.
3 - 7