Mitsubishi Electric FX3U-ENET User Manual page 238

11 TROUBLESHOOTING
11 - 16
7) Receiving error log write pointer (BFM#22648)
• This address stores the error log block number where the latest error
logging is registered.
0
1 or more : Error log block number where the latest error logging is
* If the pointer value is "16", it means that the latest error logging is
registered in the error log block 16 area.
• When 17 or more receiving errors occur, the registration of error
logging starts from error log block 1 area again.
POINT
The error log block area consists of 16 error log blocks with the same data order.
8) Error log block - Error code (BFM#22649 onwards)
• This block stores the error codes that indicate the contents of errors.
(See Section 11.4.)
9) Error log block - Command code (BFM#22650 onwards)
• This block stores the system command codes for the error causing
messages.
10)Error log block - From (BFM#22651 onwards)
• This block stores eight words from the beginning of the sending source
mail address of an error causing e-mail during communication with the
mail server, in ASCII code characters.
(Example)
If the sending source mail address was
"use@from.add.sample.co.jp",
"use@from.add.sam" is stored as ASCII code characters.
11) Error log block - Date (BFM#22659 onwards)
• This block stores the time and date on which the e-mail is received in
BCD code.
b15
Month
b15
Hour
b15
Second
b15
Higher 2-digits of year (00 to 99
12)Error log block - Subject (BFM#22663)
• This block stores 30 words from the beginning of the Subject of the e-
mail.
• A Subject is not stored successfully if it contains characters other than
alphanumeric and ASCII code.
: No error. (No registration of error log)
registered
to
b8 b7
(01 to 12 ) Lower 2-digits of year (00 to 99
H
to
b8 b7
Date
(00 to 23 )
H
to
b8 b7
(00 to 59 )
Minute
H
to b8 b7
Day of the week
)
H
SUN.: 0 to SAT.: 6
MELSEC-F
to
b0
)
H
b0
to
(01 to 31 )
H
b0
to
(00 to 59 )
H
b0
to
(0 to 6)
11 - 16