Mitsubishi Electric FX3U-ENET User Manual page 211

10 USING THE E-MAIL FUNCTION
Initial processing
normal completion
Writing the necessary data
for sending a mail to BFM
Mail sending request
BFM#10333
Mail sending status
BFM#10334
10 - 16
(2) Execution timing of the instruction
Initial
processing
1)
2)
Writing the mail
data to BFM
0000
H
0000
1) Check whether the initial processing has been completed normally.
2) Write mail data to the buffer memory.
(Mail sending destination: BFM#10337...b0 to b9)
(Subject: BFM#10339 to 10402)
(Attached file format: BFM#10338)
(Word count of attached file: BFM#10403)
(Contents of main texts or attached files: BFM#10404 to 12451)
3) Write "0001 " in BFM#10333.
H
The e-mail is sent to the mail server.
4) When sending to the mail server is complete, the result is stored in
*2
BFM#10334.
*1 Specify the attached file format by writing a parameter in BFM#10338
before sending e-mail.
0000 : Sends the attached file in binary format
H
0001 : Sends the attached file in ASCII format
H
0002 : Sends the attached file in CSV format
H
0004 : Sends the attached file as a text mail
H
*2 For details on causes of errors, see "Troubleshooting" in Chapter 11.
(a) Designate binary format when communicating between Ethernet modules.
The name of the attached file is mmddhhss.bin (system date.bin).
mm: Month dd: Date
(b) Designate either binary format, ASCII format or CSV format when a PC/UNIX
receives e-mail sent from an Ethernet module.
1) When binary format is designated
The name of the attached file is mmddhhss.bin (system date.bin).
mm: month
2) When ASCII format is designated
The name of the attached file is mmddhhss.asc (system date.asc).
mm: month
3) When CSV format is designated
The name of the attached file is mmddhhss.csv (system date.csv).
mm: month
* For details on how to receive e-mails, see (3).
* The system date for the file name is the data managed by the PLC in
which the Ethernet module is installed.
Mail Mail sending
sending start completed
3)
0001
H
8000
H
H
*1
hh: Hour ss: minute
dd: day hh: hour ss: minute
dd: day hh: hour ss: minute
dd: day hh: hour ss: minute
MELSEC-F
0000
H
4)
0001 (Normally completed)
H
0002 (Abnormally completed)
H
10 - 16