Sending/Receiving E-Mail (Attached Files) By The Plc; When Sending Data As An Attached File - Mitsubishi Electric FX3U-ENET User Manual

10 USING THE E-MAIL FUNCTION

10.7 Sending/Receiving E-mail (Attached Files) by the PLC

10.7.1When sending data as an attached file

10 - 12
This section explains how to send and receive attached files by e-mail.
The following explains the buffer memory addresses and program for sending e-mail.
The following instruction shows how to store data in an attached file and send it to an
external device.
1) Check whether mail can be sent or not.
(BFM#10334 b15: OFF)
2) Designate the destination of the mail.
Turn the bit corresponding to the e-mail destination address to ON in BFM#10337.
To send to all of the mail addresses registered, write to "3FF
3) Write the mail data to the following buffer memory addresses.
(Subject:
(Attached file format:
(Word count of attached file:
(Contents of main text or attached file: BFM#10404 to 12451)
4) Write "0001 " in BFM#10333 to send the mail.
H
5) Read BFM#10334 to check if mail was correctly sent.
".
H
BFM#10339 to 10402)
BFM#10338)
BFM#10403)
MELSEC-F
10 - 12