Error Codes Stored In The Buffer Memory - Mitsubishi Electric FX3U-ENET User Manual

11 TROUBLESHOOTING

11.4.4 Error codes stored in the buffer memory

Error code
(abnormal Description of error
code)
0050
H
0051
H
0052 The content of these errors and the error handling for each error code is the same as the end
H
codes (0050 to 0060
0054
H
Check the explanation of the applicable code shown in Subsection 11.4.1, and take actions
0055
H
accordingly.
0056
H
0057
H
0058
H
0059
H
Read and handle the error code and end code
005B
H
area.
0060
H
11 - 21
When an error occurs at each data communication processing between the Ethernet
module and an external device, the error code (abnormal code) is stored in the buffer
memory of the Ethernet module. This section explains the contents of this type of
errors and error handling procedures.
The "Storage destination" column in the error code list indicates the buffer memory
where the applicable error code is stored.
The names used for the explanation indicated in the "Storage destination" column
corresponding to the buffer memory error code storage areas shown in the table
below. (Error codes whose storage destination is not written are returned to the
external device.)
Note that the buffer memory may store error codes of the messages returned from the
external device. For error codes not shown in this manual, refer to the manual of the
external device and check the returned messages.
Name used for explanation
Initial
Open
Fixed sending
Connection
Error code
E-mail log
) returned to the external device.
H
Buffer memory
Initial abnormal code area
Open abnormal code area
Fixed buffer sending abnormal code area
Connection end code/error log area
Error code/end code area
E-mail error log area
Error handling
MELSEC-F
Buffer memory address
BFM#105
BFM#124...
BFM#125...
BFM#126...
BFM#229...
BFM#22649...
Storage destination
BFM# BFM# BFM# BFM#
105 124 125 126
BFM# BFM#
229 22649
11 - 21