Table of Contents
Advertisement
Danger and warning information
Danger
Start-up/commissioning is absolutely prohibited until it has been completely ensured that the
machine, in which the components described here are to be installed, is in full compliance
with the specifications of Directive 98/37/EC.
SINAMICS devices and synchronous motors may only be commissioned by suitably
qualified personnel.
This personnel must carefully observe the technical customer documentation associated
with this product and be knowledgeable about and carefully observe the danger and warning
information.
Operational electrical equipment and motors have parts and components which are at
hazardous voltage levels.
When the machine or system is operated, hazardous axis movements can occur.
All of the work carried-out on the electrical machine or system must be carried-out with it in a
no-voltage condition.
SINAMICS drive units are designed for operation on low-ohmic, grounded line supply
systems (TN line supply systems).
Warning
The successful and safe operation of this equipment and motors is dependent on
professional transport, storage, installation and mounting as well as careful operator control,
service and maintenance.
For special versions of the drive units and motors, information and data in the catalogs and
quotations additionally apply.
In addition to the danger and warning information/instructions in the technical customer
documentation supplied, the applicable domestic, local and plant-specific regulations and
requirements must be carefully taken into account.
1FT6 synchronous motors
Configuration Manual, (PFT6), Edition 12.2004, 6SN1197-0AD12-0BP0
Foreword
v
Hide quick links:
Advertisement
Table of Contents
