Omron NX-ILM400 User Manual page 30

Related Manuals
Manual name
Sysmac Studio Version W504
1 Operation Manual
NX-IO Configurator W585
Operation Manual
NJ/NX-series Trouble- W503
shooting Manual
NY-series Troubleshoot- W564
ing Manual
NX-series EtherCAT W519
Coupler Unit User's
Manual
NX-series Ether- W536
TM
Net/IP Coupler Unit
User's Manual
NX-series CPU Unit W535
Hardware User's Man-
ual
28
Cat. No. Model numbers
SYSMAC-
SE2
CXONE-ALD-
V4
NX701-
NX1P2-
NJ501-
NJ301-
NJ101-
NY532-1
NY512-1
NX-ECC20
NX-EIC202
NX701-
Application
Learning about the Describes the operating procedures of
operating proce- the Sysmac Studio.
dures and func-
tions of the
Sysmac Studio.
Learning about the Describes the operating procedures of
operating proce- the NX-IO Configurator.
dures and func-
tions of the NX-IO
Configurator.
Learning about the Concepts on managing errors that may
errors that may be be detected in an NJ/NX-series Con-
detected in an troller and information on individual
NJ/NX-series Con- errors are described.
troller.
Learning about the Concepts on managing errors that may
errors that may be be detected in an NY-series Controller
detected in an and information on individual errors are
NY-series Indus- described.
trial PC.
Learning how to The following items are described: the
use an NX-series overall system and configuration meth-
EtherCAT Coupler ods of an EtherCAT Slave Terminal
Unit and Ether- (which consists of an NX-series Ether-
CAT Slave Termi- CAT Coupler Unit and NX Units), and
nals information on hardware, setup, and
functions to set up, control, and monitor
NX Units through EtherCAT.
Learning how to The following items are described: the
use an NX-series overall system and configuration meth-
EtherNet/IP Cou- ods of an EtherNet/IP Slave Terminal
pler Unit and Eth- (which consists of an NX-series Ether-
erNet/IP Slave Net/IP Coupler Unit and NX Units), and
Terminals. information on hardware, setup, and
functions to set up, control, and monitor
NX Units.
Learning the basic An introduction to the entire NX701
specifications of CPU Unit system is provided along with
the NX701 CPU the following information on the CPU
Units, including Unit.
introductory infor-
• Features and system configuration
mation, designing,
• Overview
installation, and
• Part names and functions
maintenance.
• General specifications
Mainly hardware
information is pro- • Installation and wiring
vided.
• Maintenance and Inspection
NX-series IO-Link Master Unit User's Manual (W567)
Description