The following table describes the labels in this screen.
Table 71 Advanced > Remote MGMT > FTP
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset
17.5 The SNMP Screen
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your Device supports SNMP agent functionality, which allows a manager
station to manage and monitor the Device through the network. The Device supports SNMP version
one (SNMPv1) and version two (SNMPv2c). The next figure illustrates an SNMP management
operation.
Figure 104 SNMP Management Model
An SNMP managed network consists of two main types of component: agents and a manager.
An agent is a management software module that resides in a managed device (the Device). An
agent translates the local management information from the managed device into a form
compatible with SNMP. The manager is the console through which network administrators perform
AMG1302-T10A User's Guide
DESCRIPTION
You may change the server port number for a service, i f needed. However, you must use
the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the Device using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the Device
using this service.
Select All to allow any computer to access the Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the Device using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 17 Remote Management
183