Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann VITOLIGNO 300-P Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
•
• • •
•
•
•
• •
•
•
•
•
•
•
•
• •
• •
•
•
• •
• •
• • •
•
•
Commissioning steps
Inspection steps
Maintenance steps
1. Filling the heating system..............................................
2. Checking all connections on the heating water side
for leaks
3. Completing the commissioning checklist
4. Switching the power on.................................................
5. Language selection........................................................ 11
6. Setting the time and date............................................... 12
7. Configuring the supply system..................................... 12
8. Commissioning the supply system.............................. 12
9. Setting supply times for fuel supply (with vacuum
system)............................................................................ 13
10. Matching the control unit to the heating system ........ 13
11. Checking outputs (actuators) and sensors.................. 39
12. Adjusting the heating curves........................................ 41
13. Integrating a control unit into the LON......................... 44
14. Shutting down the system............................................. 46
15. Cleaning the combustion chamber............................... 47
16. Cleaning secondary heating surfaces.......................... 48
17. Cleaning the flue gas fan and Lambda probe.............. 49
18. Emptying the ash container (if required)...................... 50
19. Checking the diaphragm expansion vessel and
system pressure............................................................. 51
20. Checking the function of safety valves
21. Display "Maintenance"................................................... 52
22. Instructing the system user........................................... 53

Commissioning, inspection, maintenance

Page
6
6
5