Pilot Frequency Operation Spl And Vfoa/B Setting; Vfo Mode /Memo Mode (V/M) Setting; Vfo Settings; Pilot Frequency Transceiver Operation Method - XIEGU X5105 Instruction Manual

Hf+50mhz portable hf transceiver

Hide thumbs Also See for X5105:

Table of Contents

A. Press the [NB] button, the screen appears corresponding prompt information, NB

function is turned on.

B. Press the [NB] button again, it will turn off the NB noise suppressor.

* The NB function can only suppress the pulse noise of a specific type, and can not

replace the NR noise reduction function.

3.14 Pilot frequency operation SPL and VFOA/B setting

There are two independent VFO in X5105 transceiver, which can set different frequencies

and modes respectively. Set the VFO reasonably, and with the menu SPL function, you can

easily achieve pilot frequency transceiver operation mode.

A. Press the [A/B] button, you can switch between VFO-A and VFO-B.

B. When you switch to a certain VFO state, you can set the current VFO's working

frequency, working mode, and so on.

A. First set the receiver frequency and mode (VFO-A).

B. And then set the transmit frequency and mode (VFO-B).

C. Press [MENU] button, switch to the first page menu, select the SPL function, it opens

the pilot frequency transceiver working mode.

*You can also make full use of VFOA/B to set different frequencies or modes, so double

frequency monitoring can be achieved via real-time switching.

Transceiver can switch between VFO mode and MEMO mode, and realize flexible

operation mode.

Operation method:

A. Press the [V/M] button, you can switch between the VFO mode and the MEMO mode.

Table of Contents