Operation; Turn On / Off Transceiver; Battery / Voltage Display; Operating Frequency Band Selection - XIEGU X5105 Instruction Manual

1. LOCK button, you can lock the host button and the mouse button via this button, and
press it again to unlock.
2. PTT button, transmitting control button.
3. Move up/down, adjustable frequency increase, subtraction, or selection of items in
the menu.
4. Receiving / Transmitting indicator light, microphone operated indicator light.
5. Digital key
6. FIL button, built in filter selection.
7. MODE button, selection of host operating mode.
8. Function indicator lamp, No indication.
9. Function button, F1/F2 custom settings button.
10. MW button, store operation.
11. V/M button, frequency / channel switching.
12. XFC button, VFO-A / VFO-B switching.
13. CALL button, press this button for a long time to start the automatic antenna tuning in
the host.

3 Operation

3.1 Turn on / off transceiver

1. Turn on the transceiver: just press
2. Turn off the transceiver: in the boot state, press the key

3.2 Battery / voltage display

1. When the battery is powered by the built-in battery, the remaining battery power of
the current battery will be displayed in the upper right corner of the display.
2. When using an external power supply, after switching the [VLT] menu, this position will
display the voltage value of the current external DC power source that is currently
connected to the transceiver.

3.3 Operating frequency band selection

The frequency range of X5105 covers 0.5~54MHz. The amateur frequencies in this range
are divided into multiple frequency bands and can be switched in a number of different
ways. You can complete the equipment operation according to the operation instructions
in this section.
for a long time
for a long time.
13