Flash] - Planet Networking & Communication VIP-101T Command Line Interface Manual

PLANET VIP-101T CLI configuration
no committed data, reboot command will restart machine only.
Syntax Description
This command has no arguments or keywords.
Default
This command has no default value.
Example
usr/config$ reboot
.
Data modified, commit to flash rom?(y/n)y
This may take a few seconds, please wait....
Commit to flash memory ok!.
This may take a few seconds, please wait....
Commit to flash memory ok!
M
If you see "Data modified, commit to flash rom?" message after inputting reboot
command, this prompt indicates there are data requiring confirmation before rebooting.
Caution
If you ignore the prompt, type "n" to reboot machine without saving data, all the
modifications will be lost after rebooting.

4. [flash]

Flash command will erase current running configuration and load factory default parameter
and reboot VIP-101T.
Syntax Description
flash –clean (this command only can be applied while logging in as "root" privilege.)
Default
This command has no default value.
Example
- 3 -