F) -Server; G) -Method; H) -Ftp - Planet Networking & Communication VIP-101T Command Line Interface Manual

PLANET VIP-101T CLI configuration
TFTP/FTP server.
Syntax Description
-f Specify firmware file name on the destination TFTP/FTP server.
Default
This command has no default value
f) –server
Parameter –server is used to specify TFTP/FTP server IP address, which will be stored in
flash memory for the convenience of future firmware upgrade. This feature also can be
configured on LCD configuration menu -firmware upgrade, -Set file Server IP.
Syntax Description
-server Specify TFTP/FTP server IP address, which will be stored in machine.
Default
This command has no default value
g) –method
Parameter –method is used to specify download method to be TFTP or FTP.
Syntax Description
-method Specify firmware upgrade mode via TFTP or FTP session, 0 for TFTP.1 for FTP
Default
1 Firmware upgrade will be performed via TFTP method.
h) –ftp
Specify user name and password for FTP firmware upgrade method
For example: User prepares to upgrade the latest app rom file –VIP-101T.030213r1, the
TFTP server is 192.168.0.2.
rom –app –s 192.168.0.2 –f VIP-101T.030213r1 (If the destination server is specified via
parameter –server, you may insert command: rom –app –f VIP-101T.030213r1 to complete
firmware upgrade.).
Syntax Description
- 39 -