B) -Dev; C) -Open; D) -Close - Planet Networking & Communication VIP-101T Command Line Interface Manual

PLANET VIP-101T CLI configuration
seen with this command.
Syntax Description
-print Display PPPoE device information.
Default
This command has no default value.
Example
usr/config$ pppoe -print
PPPoE adapter information
Device
Status
User name
Password
b) –dev
Parameter –dev can be used to enable or disable PPPoE function.
Syntax Description
-dev Enable(=1) or Disable(=0) PPPoE function in VIP-101T
Default
0 PPPoE function in VIP-101T is turned off.
c) –open
While VIP-101T is not in PPPoE connection state, you may use parameter –open to
initiate a PPPoE connection.
Syntax Description
-open Initiate a PPPoE connection.
Default
This command has no default value.
d) –close
While VIP-101T is in PPPoE connection state, you may use parameter –close to
disconnect a PPPoE connection.
: Disable
: Not initialized
: pppoe
: *****
- 14 -