A) -Print; B) -Mode - Planet Networking & Communication VIP-101T Command Line Interface Manual

PLANET VIP-101T CLI configuration
usr/config$ h323
H.323 stack information and configuration
Usage:
h323 [-mode gkmode]
h323 [-gk ipaddress] [-algk ipaddress] [-gkdis used] [-e164 number] [-e164-x number]
[-alias h323id] [-tokenpwd password]
[-rtp port] [-ttl time] [-gkfind port] [-ras port]
[-range [start num1] [end num2]] [-respto t1] [-connto t2] [-dfgw IP]
h323 -print
-print Display H.323 stack information and configuration.
-mode Configure as Gatekeeper mode or Non-GateKeeper mode.
-gk Gatekeeper ip address. (0.0.0.0 ~ 255.255.255.255)
-dfgw Default Gateway IP Address. (0.0.0.0 ~ 255.255.255.255)
-algk Second Gatekeeper ip address. (0.0.0.0 ~ 255.255.255.255)
-gkname Gatekeeper ID
-e164 IP side registered number.
-e164-x IP side registered number.(x:1~9)
-alias IP side registered H323 ID.
-tokenpwd RRQ/ARQ authentication token password.
-gkdis Gatekeeper auto discovery (multicast, On=1, Off=0).
-rtp RTP port number (1024~65532).
-ttl RAS TTL time (0~3600 second).
-gkfind Gatekeeper finding port (1024~65535).
-ras Gatekeeper RAS port (1024~65535).
-range Dynamically allocated port range (1024~65535).
-respto Max waiting time for 1st response to a new call (1~200).
-connto Max waiting time for call establishment after receiving 1st
response of a new call (1~20000).
Note:
Options -gk -e164 -alias -gkdis -ttl -gkfind -ras are ignored when
RAS mode is configured as Non-GK mode.
Example:
h323 -gk 210.59.163.171 -e164 101 -alias vip-100t
h323 -mode 1
a) –print
Parameter –print is used to display H.323 stack information and configuration.
Syntax Description
This command has no arguments or keywords.
Default
This command has no default value.
b) –mode
VIP-101T is capable of running in Peer-to-Peer or GateKeeper mode. Machine default
- 21 -