Bureau]; A) -Print - Planet Networking & Communication VIP-101T Command Line Interface Manual

PLANET VIP-101T CLI configuration
Syntax Description
-h245fs H.245 separate channel after H.323 faststart mode.
Default
0 H.245 separate channel mode is disabled.
When H.323 fast start mode is enabled, if you wish to send DTMF message
G
after connection, VIP-101T will send out Q.931 message to destination call
party. You'll need to specify the Keypad type as "Q.931" in System
Note
configuration menu.

18. [bureau]

This parameter is used while other call party supports H.450 Hold feature. If this feature is
enabled, other call party will hear hole tone when "HOLD" button on VIP-101T keypad is
pressed.
usr/config$ bureau
Bureau line setting information and configuration
Usage:
bureau [-hold used]
bureau -print
-print Display Bureau line information and configuration.
-hold
Example:
bureau -hold 1

a) -print

Parameter –print can be used to display bureau setting information and configuration.
Syntax Description
This command has no arguments or keywords.
Specify the hold tone generation (using PCM file). (On/Off)
Setting value (On=1, Off=0).
- 36 -