Voice] - Planet Networking & Communication VIP-101T Command Line Interface Manual

Planet technology ip phone vip-101t user's manual

Table of Contents

PLANET VIP-101T CLI configuration

1. Parameters in this H.323 configuration menu are not suggested to change without

assistance of ITSP or experienced personnel, improper configuration will case

communications fail or malfunction in machine.

2. In Peer-to-Peer mode, h323 –print will only display information on e164, alias,

Note

mode, RTP port, and allocated port range fields.

3. In Peer-to-Peer mode, please dial "#" after press IP address (ex.10.1.1.1 please

dial 10*1*1*1#) or E.164 number in Phone book to connect to destination call

party.

14. [voice]

voice command is associated with the voice codec setting information. These parameters

are designed to meet most calling environment. It is strongly recommended not to modify

these parameters on your own. If you met difficulty to establish communication toward

destination call party, please consult ITSP engineering staff, experienced personnel or local

distributor support staff for proper configuration.

- 28 -

Table of Contents