E) -Id; F) -Pwd; G) -Reboot - Planet Networking & Communication VIP-101T Command Line Interface Manual

PLANET VIP-101T CLI configuration
Syntax Description
-close Disconnect current PPPoE connection.
Default
This command has no default value.
e) –id
This parameter can be used to configure PPPoE connection user name.
Syntax Description
-id User name for PPPoE connection.
Default
pppoe
f) –pwd
This parameter can be used to configure PPPoE connection password.
Syntax Description
-pwd Password for PPPoE connection.
Default
pppoe.
G
If difficulty is met during PPPoE connection setup, please verify if the
username/password are correctly inserted, and contact your ISP for proper
Hint
information.
g) –reboot
If user enable this function, after PPPoE being disconnected unexpectedly, VIP-101T will
automatically reboot to re-establish PPPoE conhnection. After reboot, if VIP-101T still
can't get contact with server, VIP-101T will keep trying to connect one more time. On the
other hand, if this function is disabled, VIP-101T won't reboot and keep trying to connect.
Syntax Description
-reboot Reboot VIP-101T while PPPoE session disconnected unexpectedly.
Enable(=1) or Disable(=0)
Default
- 15 -