Related Manuals for Planet Networking & Communication VIP-1000 Series
Summary of Contents for Planet Networking & Communication VIP-1000 Series
- Page 2 1. Package Contents The package should contain the following items plus the VIP-1000PT/VIP-1000T. If any item is missing or damaged, please contact the seller immediately. Quick Installation Handset Power Adapter Handset RJ45 Cable Stand Guide Cord (VIP-1000T only) 2. Hardware Installation Step 1.
- Page 3 Network Switch Use only the DC 5V 1A power to ensure correct functionality. Note Step 2b. Connecting Power via PoE Interface and Network The VIP-1000PT can be configured without external power if connected to an IEEE 802.3af/at PSE device such as 802.3af/at PoE injector/hub or 802.3af/at PoE switch. PoE Switch Only the VIP-1000PT supports 802.3af/at power injection;...
- Page 4 1 Network Configuration 2 Phone Port Configuration 3 Factory Reset **** 4 Reboot Start IVR VIP-1000 series Choose 5 WAN Port Login 6 Web Access Port 7 Software Version 3. IVR Descriptions Below is the table that lists commands, and descriptions:...
- Page 5 6) ‘Operation successful’ will be reported, meaning the changes have been successfully made. Then VIP-1000PT/VIP-1000T will return with a prompt: Please enter your option, one Network Configuration ‘ ……’. #’ after inputting password and select the new WAN 1. Add ‘...
- Page 6 4) ‘Operation successful’ will be reported if it’s done properly. Note: If you want to quit, press ‘**’. 1.5 DNS 1) Pick up phone and press ‘****’ to start IVR; 2) Choose ‘1’ and then ‘5’, and the VIP-1000PT/VIP-1000T will report on 1.
- Page 7 1) Pick up phone and press ‘****’ to start IVR; 2) Choose ‘4’, and the VIP-1000PT/VIP-1000T will report on ‘Reboot’. 3) At the prompt, please enter password. Refer to Operation 1 for the password input. 4. Reboot 4) The VIP-1000PT/VIP-1000T will reboot if password is right and operation is done properly.
- Page 8 4. NOTICE In the Voice menu, press *(asterisk) to return to the up level menu. If any changes are made in the IP assignment mode, please reboot the VIP-1000PT/ VIP-1000T to take effect the settings. When entering IP address or subnet mask, input ‘*’ to represent ‘.’ and add ‘#’ to finish inputting, for example, to enter the IP address 192.168.1.11, press these keys:192*168*1*11#.