E) -Algk; F) -Gkname; G) -E164 - Planet Networking & Communication VIP-101T Command Line Interface Manual

PLANET VIP-101T CLI configuration
Syntax Description
-dfgw Destination H.323 Gateway IP Address.
Default
x (no default destination H.323 gateway)
e) –algk
This parameter is used to configure secondary Gatekeeper IP address or URL address.
If VIP-101T tries to register to primary Gatekeeper for 10 times but failed, it will try to
register to secondary (alternative) Gatekeeper configured in this option.
Syntax Description
-algk IP address of Secondary Gatekeeper.
Default
Null (This command has no default value.)
f) –gkname
Parameter –gkname is used to configure the Gatekeeper name/ID for Gatekeeper
auto-discovery operations. When VIP-101T send out Gatekeeper discovery message;
this ID will be encapsulated to search matched Gatekeeper to register with.
Syntax Description
-gkname Destination Gatekeeper ID
Default
Null (This command has no default value.)
g) –e164
Parameter –e164 is used to identify one number for VIP-101T to register with the
GateKeeper
Syntax Description
-e164 E.164 alias (registered telephone number) toward destination Gatekeeper.
- 23 -