B) -Hold; Rom]; A) -Print; B) -App,-Boot, -Dsptest, -Dspcore, -Dspapp, -Rbpcm And -Htpcm - Planet Networking & Communication VIP-101T Command Line Interface Manual

PLANET VIP-101T CLI configuration
Default
This command has no default value.

b) -hold

If other terminals support H.450 hold function, and execute hold function when connecting
with VIP-101T, user will hear hold tone from VIP-101T. (0 for off,1 for on)
Syntax Description
-hold Enable or disable H.450 service hold tone generation, 0 for disable and 1 for
enable.
Default
1 H.450 hold feature is turned on.

19.[rom]

Command rom is used to perform firmware upgrade in VIP-101T. While you receive or
download up-to-date firmware file from local distributor, you may refer to the following
commands to upgrade your VIP-101T to obtain latest add-on features or maintenance
service.
rom command related parameters can be shown below:

a) -print

Parameter –print is used to displayVIP-101T firmware version information. Please be sure to
attach this information while sending support inquiry to our distributor support staff.
Syntax Description
This command has no arguments or keywords.
Default
This command has no default value.
b) -app,-boot, -dsptest, -dspcore, -dspapp, -rbpcm and –htpcm
To complete firmware upgrade, you'll need to logon VIP-101T as root priviledge.
There are several types of firmware image files in VIP-101T: main boot code, main
application image, DSP testing image, DSP kernel image, DSP application image, Ring
- 37 -