1. Manuals
  2. Brands
  3. Planet Networking & Communication Manuals
  4. IP Phone
  5. SIP IP PHONE VIP-154NT
  6. User manual

Planet Networking & Communication VIP-154NT User Manual

Planet technology sip ip phone user's manual
Hide thumbs Also See for VIP-154NT:
Table of Contents

Advertisement

Quick Links

Download this manual
SIP IP Phone
VIP-154T/VIP-154PT/VIP-154NT
User's manual
1

Advertisement

Table of Contents
loading

Related Manuals for Planet Networking & Communication VIP-154NT

Summary of Contents for Planet Networking & Communication VIP-154NT

  • Page 1 SIP IP Phone VIP-154T/VIP-154PT/VIP-154NT User’s manual...
  • Page 2 Copyright Copyright (C) 2006 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted.
  • Page 3 Revision User’s Manual for PLANET SIP IP Phone: Model: VIP-154T/VIP-154PT/VIP-154NT Rev: 1.0 (2006, October) Part No. EM-VIP154V1...

  • Page 4: Table Of Contents

    Speed Dial settings ...23 Call Forward ...24 SNTP settings ...26 Volume Setting ...26 Ringer Setting ...27 Block Setting ...28 Auto Answer settings (For VIP-154NT) ...28 Dial Plan Settings ...29 Flash Time Setting (For VIP-154NT)...30 Call waiting Settings...30 Voice Mail Settings...31 DDNS Settings ...31 Service Domain Settings ...32...
  • Page 5 Auto Configuration...36 PTT Settings (For VIP-154NT) ...37 Country Settings ...37 System Authority ...37 Save & Reboot...38 Firmware Upgrade...38 Reset to Default ...39 Reboot without saving ...39 Appendix A Voice communications...40 Case 1: VIP-154T to VIP-154T connection via IP address ...40 Case 2: Voice communication via SIP proxy server _SIP-50...41...

  • Page 6: Chapter 1

    Ethernet (PoE) IP Phone －VIP-154PT. And the VIP-154T is the cost-effective SIP IP Phone; the VIP-154 series are SIP 2.0 (RFC3261) compliant with SIP digest authentication supports. The VIP-154T / VIP-154PT / VIP-154NT ("IP Phone" in the following term, unless specified) features high-quality speakerphone technology, and includes an easy-to-use speaker on/off button and call hold/transfer buttons for various voice services.

  • Page 7: Product Features

    The IP Phone integrates a high-quality speakerphone with the Call Hold, Forward, Transfer and Waiting functions and also provides advanced telephone features, such as 4 speed-dial keys, 3-way conference key, last number redial, incoming call history indicator in a much more convenient and functional manner than traditional telephone sets.

  • Page 8: Package Content

    VoIP Features • SIP 2.0 (RFC3261) compliant • Peer-to-Peer / SIP proxy calls • Voice codec support: G.711, G.723.1, G.726, G.729A, G.729B • Voice processing: Voice Active Detection, DTMF detection/ generation, G.168 echo cancellation (16mSec.), Comfort noise generation • In band and out-of-band DTMF support Package Content The contents of your product should contain the following items: VoIP IP Phone...

  • Page 9: Physical Details

    Physical Details The following figure illustrates the front/rear panel of IP Phone. Rear View Rear Panel of VIP-154T Rear Panel of VIP-154PT Rear Panel of VIP-154NT...
  • Page 10 (VIP-154PT) RJ-11 connector, connected directly to the PSTN analog line. LINE Press 0* to switch to PSTN mode. (VIP-154NT only) 1. IP Phone default IP is http://192.168.0.1. Press RESET Note button on rear panel over 5 seconds will reset the VoIP IP Phone to factory default value.

  • Page 11: Front View And Keypad Function

    Front View and Keypad function Keypad Description LCD Display Speed Dial M1~M4 MENU Vol +/↑ Vol - /↓ Menu and all status shall be displayed for users. To make a speed dial call by pressing the speed dial key M1 ~ To bring out the menu selection while IP Phone is in idle state.
  • Page 12 To hold the conversation. Hold Call Log Show the calls history. In default machine operation, the VIP-154NT is VoIP mode. If you want to make a PSTN phone call, press the “0*” key to switch to PSTN mode. Hint For IP Phone, it can register to three different SIP Proxy servers at the same time.

  • Page 13: Chapter 2 Preparations & Installation

    Physical Installation Requirement This chapter illustrates basic installation of IP Phone • Network cables. Use standard 10/100Base-TX network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem Administration Interface PLANET IP Phone provides GUI (Web based, Graphical User Interface) for machine management and administration.

  • Page 14: Lan Ip Address Configuration Via Web Configuration Interface

    IP Phone will prompt for logon username/password, please enter: root / null (not password) to continue machine administration. In order to connect machine for administration, please Note locate your PC in the same network segment (192.168.0.x) of IP Phone. If you’re not familiar with TCP/IP, please refer to related chapter on user’s manual CD or consult your network administrator for proper network configurations.
  • Page 15 Subnet Mask LAN mask of Default: 255.255.255.0 Default Gateway Gateway of Default: 192.168.0.254 After confirming the modification you’ve done. Please click on the Submit button to apply settings and browse to “Save & Reboot” menu to reboot the machine to make the settings effective. Connection Type Fixed IP DHCP clinet...

  • Page 16: Initialize Ip Phone Through Lcd Phone Menus

    Initialize IP Phone through LCD phone menus STEP 1: Power on machine, the LCD screen displays flashing greeting as below: Starting… STEP 2: Wait for 10 seconds, the main LCD screen shall be shown as below, and when the Internet access is available, the IP phone will connect to the SNTP server.
  • Page 17 Phone setting Network SIP Settings Call forward 3.1.1 All Forward 3.1.1.1 Activation: To Enabled/Disabled this function. 3.1.1.2 Number: Forward to a Speed Dial Number. 3.1.2 Busy Forward 3.1.2.1 Activation: To Enabled/Disabled this function. 3.1.2.2 Number: Forward to a Speed Dial Number. 3.1.3 No Answer Forward 3.1.3.1 Activation: To Enabled/Disabled this function.
  • Page 18 Transversal Administrator 5.1.2 Service domain / Second realm / Third realm 5.1.2.1 First / Second / Third realm 5.1.2.1.1 Activation 5.1.2.1.2 User name 5.1.2.1.3 Display name 5.1.2.1.4 Register name 5.1.2.1.5 Register password 5.1.2.1.6 Proxy server 5.1.2.1.7 Domain server 5.1.2.1.8 Outbound proxy 5.1.3 Codec 5.1.3.1 Codec type 5.1.3.1.1 G.711 uLaw...

  • Page 19: Chapter 3 Network Service Configurations

    Configuringnd monitoring your IP Phone from web browser The IP Phone integrates a web-based graphical user interface that can cover most configurations and machine status monitoring. Via standard, web browser, you can configure and check machine status from anywhere around the world. Overview on the web interface of IP Phone With web graphical user interface, you may have: More comprehensive setting feels than traditional command line interface.
  • Page 20 When users login the web page, users can see the IP Phone system information like firmware version, company…etc in this main page. IP Phone main page...

  • Page 21: Chapter 4 Ip Phone Configurations

    Phone Book settings IP Phone can set up 140 records of Phone Book. User can make calls via Phone Book feature of IP Phone. Field Phone Book Page Phone Name IP Phone Configurations Description The default is Page 1. It can select Page1 ~ Page 14 to look round Phone Book records.

  • Page 22: For Example

    Select If you need to add a phone number into the Phone Book list, you need to input the position, the name, and the phone number (by URL type). When you finished a new phone list, just click the “Add Phone” button.

  • Page 23: Speed Dial Settings

    Selecting the recorder you want to dial and press OK button. It sill show the detail information as below: 192.168.1.2:5062 STEP 4: Pick up the telephone handset or press Handfree button to dial to this telephone. IP Dialing... 192.168.1.2:5062 Speed Dial settings In Speed Dial setting function you can add/delete Speed Dial number.

  • Page 24: Call Forward

    Call Forward This page defines Call Forward function. You can setup the phone number you want to forward in this page. There are three type of Forward mode. You can choose All Forward, Busy Forward, and No Answer Forward by click the icon: All Forward: All incoming call will forward to the number you chosen.
  • Page 25 Call Forward function for VIP-154T/VIP-154PT Call Forward to PSTN (VIP-154NT): VIP-154NT not only supports Call Forward to IP calls, but also can forward the calls to PSTN. You can choose the Call Forward type with PSTN, and then input the name and the PSTN number in URL/Number field.

  • Page 26: Sntp Settings

    SNTP settings This page defines the primary and second SNTP server IP address, to get the date/time information. Also you can base on your location to set the Time Zone, and how long need to synchronize again. When you finished the setting, please click the Submit button. Volume Setting This page defines the Handset Volume, Ringer Volume, and the Handset Gain.

  • Page 27: Ringer Setting

    Beside the above settings, VIP-154NT also can set the volume of PSTN. PSTN-Out Volume is to set the volume for you can hear from the PSTN line. PSTN-In Gain is to set the volume send out to the other PSTN side’s haneset.

  • Page 28: Block Setting

    This page defines the Auto Answer function. You can set the Auto Answer function to answer the incoming call by the phone. If the call is come from the IP, then the VIP-154NT can let user to redial the call to PSTN phone number. If the call is coming from PSTN, then the VIP-154NT can let user to redial to IP Phone number.

  • Page 29: Dial Plan Settings

    Dial Plan Settings This page defines the Dial Plan Setting function. This function is when you input the phone number by the keypad but you don’t need to press “#”. After time out the system will dial directly. Symbol Explan: Digits Description 0, 1, 2, 3, 4, 5, 6, 7, 8, 9...

  • Page 30: Flash Time Setting (For Vip-154Nt)

    Flash Time Setting (For VIP-154NT) When you use the VIP-154NT and you need to press the Hook to do the Flash (Switch to the other phone line or HOLD), this function is for you to set the time you press the Hook to represent the Flash function.

  • Page 31: Voice Mail Settings

    Voice Mail Settings This page defines the voice mail key function. When device register to IP PBX and it support Voice Mail System. It can set up the voice mail number in advanced, and press the “MESSAGE” button from keypad. It will enter for voice mail system. DDNS Settings This page defines the DDNS setting in this page.

  • Page 32: Service Domain Settings

    Service Domain Settings This router comes with the built-in firewall based on the advanced technology of Stateful Packet In Service Domain Function you need to input the account and the related informations in this page, please refer to your ISP provider. You can register three SIP account in the Phon. You can dial the VoIP phone to your friends via first enable SIP account and receive the phone from these three SIP accounts.

  • Page 33: Port Settings

    Port Settings This page defines the SIP and RTP port number in this page. Each ISP provider will have different SIP/RTPport setting, please refer to the ISP to setup the port number correctly. When you finished the setting, please click the Submit button. Codec Settings This page defines the Codec priority, RTP packet length, and VAD function in this page.

  • Page 34: Codec Id Setting

    Codec ID Setting This page defines the Codec ID. Sometimes 2 VoIP devices with different Codec ID will cause the interopability issue. If you are talking with others got some problems, you may ask the other one what kind of Codec ID he use then you can change your Codec ID. When you finished the setting, please click the Submit button.

  • Page 35: Rport Settings

    RPort Settings This page defines the RPort Enable/Disable in this page. To change this setting, please following your ISP information. When you finished the setting, please click the Submit button. Other Settings This page defines the Hold by RFC, Voice/SIP QoS and SIP expire time in this page. To change these settings please following your ISP information.

  • Page 36: Auto Configuration

    Auto Configuration This page defines the Auto Configuration (Auto Provision) setting. IP Phone supports TFTP, FTP, HTTP and IP PBX auto configuration function in total. In IP PBX auto configuration setting you need to check with your service provider if they have provided this function. Usually this function will be bounden with an IP PBX to use in the office.

  • Page 37: Ptt Settings (For Vip-154Nt)

    PTT Settings (For VIP-154NT) This page defines the PTT settings. When VIP-154NT connected to different country’s PSTN Line, you have to set the country’s setting to meet the requirement. When you finished the setting, please click the Submit button. Country Settings This page defines the ICMP echo Enable/Disable.

  • Page 38: Save & Reboot

    Save & Reboot In Save & Reboot you can save the changes you have done. If you want to use new setting in the IP Phone, you have to click the Save button. After you click the Save button, the IP Phone will automatically restart and the new setting will effect.

  • Page 39: Reset To Default

    Firmware Upgrade methods: Please find the firmware of IP Phone, and be sure to check the firmware upgrade steps to load the firmware into machine properly for revolutions. a) Log in IP Phone via Microsoft Internet explorer web browser, and insert IP address/update.htm in the address bar.

  • Page 40: Appendix A Voice Communications

    Then the phone in 192.168.0.2 should ring. Please repeat the same dialing steps on VIP-154T B to establish the first voice communication from the second VIP-154T In default machine operation, the VIP-154NT is VoIP mode. If you want to make a PSTN phone call, press the “0*”...

  • Page 41: Case 2: Voice Communication Via Sip Proxy Server

    Case 2: Voice communication via SIP proxy server _SIP-50 VIP-154T IP Address: 192.168.0.1 Line Number: 1001 Machine configuration on the VIP-154T: STEP 1: Log in SIP-50 and create two testing accounts/password: 1001/123 (for VIP-154T A), and 1002/123(for VIP-154T B) for the voice calls. STEP 2: Please log in VIP-154T A via web browser, browse to the SIP setting menu and select the Domain Service config menu.

  • Page 42: Case 3: Voice Communication Via Ip Pbx System _ Ipx-2000 (Auto-Config)

    STEP 3: Repeat the same configuration steps on VIP-154T B, and check the machine registration status, make sure the registrations are completed. Test the scenario: To verify the VoIP communication, you may make calls from SIP client (VIP-154T A) 1001 to the number 1002 (VIP-154T B) or reversely make calls from SIP client (VIP-154T B) 1002 to the number 1001 (VIP-154T A ) Case 3: Voice communication via IP PBX system _ IPX-2000 (Auto-config)
  • Page 43 If you’d like to enable auto-config for IP extension features in IPX-2000, please be sure to setup the DHCP option code and the value information. In most case, insert the optional code 151 and the value=http://192.168.0.50/tftpboot/ Note: the 192.168.0.50 is the IP address of IPX-2000 STEP 2: Please browse to the Device menu and create new device for the auto configuration.
  • Page 44 Machine configuration on the VIP-154T: STEP 5: Please log in VIP-154T A via web browser, browse to the Advanced Settings menu. In the setting page, please browse to the Auto-config page, and select to IP-PBX choice of the Auto Configuration features for IP PBX system. STEP 6: After enabled the Auto-config feature, the VIP-154T A shall be able to obtain IP address and SIP extension information from IP PBX system IPX-2000 information.

  • Page 45: Case 4: Call Forward Feature _Example 1

    Case 4: Call Forward Feature _Example 1 In the following samples, we’ll introduce the Call Forward Feature applications. In this example, there are three VIP-154T register to SIP-50 and VIP-154T_A had set Call Forward function to VIP-154T_B. (The detail registration settings of SIP-50 and VIP-154T please refer to the instruction of Case 3) Machine configuration on the VIP-154T: STEP 1:...

  • Page 46: Case 5: Call Forward Feature_Example 2

    3003(VIP-154T_C). Case 5: Call Forward Feature_Example 2 In this example, there are one VIP-154NT and two VIP-154T register to SIP-50. The VIP-154NT_A had set Call Forward function to phone number 1111-2222 (PSTN).
  • Page 47 VIP-154T_C pick up the telephone and dial the number 1001(VIP-154NT_A), because VIP-154NT_A had set up All Forward function to the PSTN Phone Number 11112222, so the PSTN Phone Number 11112222 will ring up then it pick up the telephone and communication with the number 3003(VIP-154T_C).

  • Page 48: Case 6: Call Forward Feature_Example 3

    Case 6: Call Forward Feature_Example 3 In this example, there are one VIP-154NT and two VIP-154T register to SIP-50. The VIP-154NT_A had set Call Forward function to number 2002 (VIP-154T_B). Machine configuration on the VIP-154NT: STEP 1: Please log in VIP-154NT_A via web browser, browse to the Phone Settings menu and select the Call Forward config menu.
  • Page 49 PSTN Phone Number 11112222 pick up the telephone and dial the PSTN Phone Number 33334444(VIP-154NT_A), because VIP-154NT_A had set up All Forward function to the number 2002(VIP-154T_B), so the number 2002(VIP-154T_B) will ring up then it pick up the telephone and communication with the PSTN Phone Number 11112222.

  • Page 50: Case 7: Call Forward Feature_Example 4

    Case 7: Call Forward Feature_Example 4 In this example, there are three VIP-154T and connect with Peer to Peer mode. VIP-154T_A had set Call Forward function to VIP-154T_B. Machine configuration on the VIP-154T: STEP 1: Please log in VIP-154T_A via web browser, browse to the Phone Settings menu and select the Call Forward config menu.

  • Page 51: Case 8: Auto Answer Feature_Ip To Pstn

    Case 8: Auto Answer Feature_IP to PSTN In this example, there are one VIP-154NT and two VIP-154T and connect with Peer to Peer mode. The VIP-154NT_A had set Auto Answer function for forwarding calls to arbitrary telephone. If there have incoming IP calls and VIP-154NT_A doesn’t answer the incoming calls after specific time, the caller will...
  • Page 52 PIN Code Enabled function, then the sample configuration screen is shown below: Test the scenario: VIP-154T_C pick up the telephone and dial the IP Address 192.168.0.1(VIP-154NT_A), VIP-154NT will ring up but doesn’t answer the call. After 3 rings, the VIP-154T_C will hear the prompt sounds then input the password 123#.

  • Page 53: Case 9: Auto Answer Feature_Pstn To Ip

    Case 9: Auto Answer Feature_PSTN to IP In this example, there are one VIP-154NT and two VIP-154T and connect with Peer to Peer mode. The VIP-154NT_A had set Auto Answer function for forwarding to arbitrary telephone. If there have incoming PSTN calls and VIP-154NT_A doesn’t answer the incoming calls after specific time, the caller will hear prompt sounds to input the password and then dial out an arbitary IP telephone.
  • Page 54 The Phone Number 11112222 pick up the telephone and dial the PSTN Phone Number 33334444(VIP-154NT_A), VIP-154NT will ring up but doesn’t answer the call. After 3 rings, the Phone Number 11112222 will hear the prompt sounds then input the password 123#. The Phone Number 11112222 will hear the dial tone then input 0#.

  • Page 55: Appendix B Vip-154 Series Specifications

    0~50 degree C, 0~90% humidity Environment Power Requirement 12V DC Power Over Ethernet 802.3af compliant at VIP-154PT EMC/EMI CE, FCC Class B SIP PoE IP Phone SIP IP Phone with PSTN connectivity VIP-154PT VIP-154NT 1 x RJ-11 PSTN connectivity at VIP-154NT...

This manual is also suitable for:

Vip-154ptVip-154t

Table of Contents